CUSCO SUBARU ADVAN IMPREZA
Publicado: 25 Ago 2006 17:41
CUSCO RACING is now back in the 2006 Super GT Championship, and competing in GT300 class starting from Rd. 5 Sport land SUGO on July 22nd-23rd, after 10month of R&D for brand new racing machine.
Brand new “CUSCO SUBARU ADVAN IMPREZA” is the first ever AWD GT car with Transaxle gearbox And there had been no participation of AWD racing car for Super GT/JGTC for 10years, after the Skyline GT-R in 1996.
Development of our 2006 machine was started 1 year ago. Until the end of 2005, we were the only Subaru competing in Super GT/JGTC, and the machine was RWD to avoid the weight increase. On 2006 model, we had successfully lessened the weight by developing new body and chassis, and re-designing the roll cage. Now, brand new 2006 machine had gained the advantage of traction by far from 2005 RWD model, and the identity of SUBARU Impreza, which has symmetrical AWD system.
Exterior design is still almost the same as 2005 model, but Front fender and Rear wing was re-designed considering the Aero dynamics and air drag.
Engine is tuned by STi (Subaru Technica International) as we have done in past years. STi had added their experiences in WRC, and succeeded to add the Low RPM torque, improve Anti-lug system (miss-firing system) and minimize the fuel consumption. Surprisingly, Exhaust pipe is located in front of the Front left tire.
Almost everything except for the original chassis and engine was designed and developed by Carrosser/CUSCO Racing in house, including AWD gearbox and Suspension. Both Front and Rear suspension are changed to inboard type double wishbone type, and Wheelbase is extended from 2525mm in 2005 model, into 2540mm, which is same as SUBARU Impreza WRX STi SpecC.
CUSCO SUBARU ADVAN IMPREZA GT '06 Specification Design & DevelopmentCarrosser Co., Ltd.
（CUSCO is the brand of Carrosser Co., Ltd.）
Chassis code: E-GD
Length: 4465mm
Width: 1840mm
Wheel base: 2540mm
TreadFront：1530mm Rear：1530mm
Weight: 1150kg
Engine code: EJ20
Engine type: Horizontal 4cylinder DOHC16Valve w/Single turbine
Horse Power: 300ps +
Torque: 40kgf/m +
Turbo charger: IHI Single turbine
Restrictor: 36mm
Fuel system: Subaru Technica International（ＳＴi）
Engine tuning: Subaru Technica International（ＳＴi）
Engine maintenance: Subaru Technica International（ＳＴi）
Chassis maintenanceCarrosser Co., Ltd.
Heat exchange: systemCUSCO（Radiator, Oil cooler, Inter-cooler）
Roll Cage: SAFETY21
Transmission: CUSCO Sequential 6speed Transaxle AWD gearbox
Clutch: EXEDY Carbon 5.5inch
Suspension type: Front/Rear：Double wishbone (Push-rod inboard type)SpringFront/Rear：CUSCO
Suspension arm: Front/Rear：CUSCO Pillow ball suspension arms
Shock Absorber: Front/Rear：SHOWA
LS: DFr:1wayRS Ctr:1wayRS Rr:1wayRS （CUSCO）
Brake: Front/Rear：ALCON water-cooled 6pod caliper / Ferode pad
Tire: YOKOHAMA ADVAN 280-680-R18
Wheel: Racing Hart, CP-035MAG, 11.0J-18
Body kit: CUSCO
Oil:BP
Seat: Bride GARDISⅢ(CFRP)
Seat: HarnessTAKATA MPH-350R
Impreza007
