ZR Autos Ferrari 360 spyder by Novitec...
ZR Autos Ferrari 360 spyder by Novitec...
Vehicle layout
Mid-engine, awd, 2-door, spider
Engine
NOVITEC SUPERSPORT Bi-compressor, 2 superchargers, heat-insulated, watercooled, NOVITEC-tectronic and Carbon airfilter-housing.
Max sae horsepower
606 @ 8600 rpm
Max sae torque, lb-ft
415 @ 6250 rpm
0-60 mph (sec)
3.6
Brake System
Front: 2 8-piston brake-calipers with 380mm discs
Rear: 2 4-piston brake-calipers with 380mm discs
Mid-engine, awd, 2-door, spider
Engine
NOVITEC SUPERSPORT Bi-compressor, 2 superchargers, heat-insulated, watercooled, NOVITEC-tectronic and Carbon airfilter-housing.
Max sae horsepower
606 @ 8600 rpm
Max sae torque, lb-ft
415 @ 6250 rpm
0-60 mph (sec)
3.6
Brake System
Front: 2 8-piston brake-calipers with 380mm discs
Rear: 2 4-piston brake-calipers with 380mm discs
-
- 8 cilindros
- Mensajes: 3976
- Registrado: 19 Sep 2005 07:37
- Ubicación: San Vicente de Moravia
- Contactar:
y por si fuera poco aqui hay otro, un F355 twin turbo..... :eek:
We have completed a Ferrari F355 Twin Turbo kit that has just been released to the public. This is the most technologically advanced and comprehensive turbo kit currrently available in the world. With dyno tuned and proven power, this kit has been drag raced and driven for over 7000 of miles with no signs of detonation or failure of any sort. Sheer performance wise, this F355 Twin Turbo kit will perform along side any other supercar in the world, including the McLaren F1.
The most amazing part of this is that it is run off stock internals and stock clutch. It also comes pretuned for 2 boost level's: 6psi and 13psi.
Performance wise, I highly doubt, that with this kit, you will run into a car that matches this performance, ever.
0-60 in 3.2 seconds
0-100 in 7.9 seconds
60' time of 1.7 seconds (6psi) and 2.2 seconds (13psi)
1/4 mi (13psi) in the 10's at over 130mph
Top Speed (13psi) is over 220mph
Here is a video on the drag strip. The burnout was done in second gear, and the tires are 3 year old Pirelli P Zero tires. With slicks, the car is in the mid 10's.
http://www.fiautosports.com/Ferrari...F355TT_drag.avi
The kit ECU is a standalone ECU, the MoTec M800 which is pretuned for either the 6psi or 13psi. It also uses 2 twin ball bearing turbos made by Garrett, but custom made for the application. It also hosts twin intercoolers with fans, controlled by the MoTec. For any other questions, shoot an email to FI@fiautosports.com.
Also, this has been submitted with hi-res pics to be included (hopefully) in the next Modified L&E as a product release.
We have completed a Ferrari F355 Twin Turbo kit that has just been released to the public. This is the most technologically advanced and comprehensive turbo kit currrently available in the world. With dyno tuned and proven power, this kit has been drag raced and driven for over 7000 of miles with no signs of detonation or failure of any sort. Sheer performance wise, this F355 Twin Turbo kit will perform along side any other supercar in the world, including the McLaren F1.
The most amazing part of this is that it is run off stock internals and stock clutch. It also comes pretuned for 2 boost level's: 6psi and 13psi.
Performance wise, I highly doubt, that with this kit, you will run into a car that matches this performance, ever.
0-60 in 3.2 seconds
0-100 in 7.9 seconds
60' time of 1.7 seconds (6psi) and 2.2 seconds (13psi)
1/4 mi (13psi) in the 10's at over 130mph
Top Speed (13psi) is over 220mph
Here is a video on the drag strip. The burnout was done in second gear, and the tires are 3 year old Pirelli P Zero tires. With slicks, the car is in the mid 10's.
http://www.fiautosports.com/Ferrari...F355TT_drag.avi
The kit ECU is a standalone ECU, the MoTec M800 which is pretuned for either the 6psi or 13psi. It also uses 2 twin ball bearing turbos made by Garrett, but custom made for the application. It also hosts twin intercoolers with fans, controlled by the MoTec. For any other questions, shoot an email to FI@fiautosports.com.
Also, this has been submitted with hi-res pics to be included (hopefully) in the next Modified L&E as a product release.
-
- 8 cilindros
- Mensajes: 3976
- Registrado: 19 Sep 2005 07:37
- Ubicación: San Vicente de Moravia
- Contactar:
- CELICA3SGE
- 8 cilindros
- Mensajes: 3823
- Registrado: 19 Sep 2005 15:06
- Ubicación: Delante suyo...otra vez!!!
- Contactar: